- All Products
- Electric table parts
- Handset, round, 3 memory buttons JCHT35M6
Hand controller JCHT35M6
The JCHT35M6 is an innovative touch and swivel hand controller that is the perfect choice for office desks.
The OLED can display LOGO and set seat reminder, upper and lower limits, automatic lock and has 3 memory slots.
The JCHT35M6 can be mounted on a variety of height adjustable desks, allowing easy control of desk elevation by rotation.
The JCHT35M6 can display error codes to help analyse potential system faults.
OLED displays actual altitude 4 touch buttons (3 memory buttons, 1 save button)
Colour: Space white
Touch screen, reversible design, seat reminder, upper and lower limit, automatic lock
Cable length: 2000mm with 8-pin crystal plug
Compatible control box: JCB35N1, JCB35N2, JCB35N3, JCB35N4
Ambient temperature: indoor (+5°C to +40°C).
Press and hold down the DOWN button on the hand control until the table reaches its lowest height. Release the ALAS button. Press and hold the ALAS button again until the LED display reads "RST". Release the ALAS button. Your desktop is now ready for use.
If your desktop does not work properly, it may need to be reset. If your desk has a handheld controller with an LED display showing "RST", perform the reset procedure in the same way if the body only moves downwards.
If the LED display shows an error message (''E01-E013''), make sure that all wired connections are properly connected (feet to cables, cables to control box). Then perform the reset procedure.
If the error message persists after reset, contact your dealer.
If the display shows "HOT", allow the frame to cool for 20 minutes.